Skip to content
Office of the Assistant Secretary for Research and Technology
ITS Joint Program Office

ITS Standards

ITS Standards Search
Skip to content

Close

ITS Standards have been developed for many of the architecture flows in the National ITS Architecture. Click on the standard(s) to view the architecture flows and their communication requirements. More...

Skip to content

Close

ITS Standards have been developed for many of the architecture flows in the National ITS Architecture. Click on the standard(s) to view the architecture flows and their communication requirements. More...

Skip to content

Close

ITS Standards have been developed for many of the architecture flows in the National ITS Architecture. Click on the standard(s) to view the architecture flows and their communication requirements. More...

Skip to content

Close

ITS Standards have been developed for many of the architecture flows in the National ITS Architecture. Click on the standard(s) to view the architecture flows and their communication requirements. More...

Skip to content

Close

ITS Standards have been developed for many of the architecture flows in the National ITS Architecture. Click on the standard(s) to view the architecture flows and their communication requirements. More...

SAE J2366/1   ITS Data Bus - lDB-C Physical Layer
A physical interface device (connector) that will ensure compatibility between vehicles and aftermarket devices. Physical interface performance requirements, circuit identification and configuration, and electrical requirements for the physical layer of the ITS data bus.
view factsheet
For more information on how to obtain standards:
http://store.sae.org Phone: 877-606-7323


Current Published Version: Version 1, Published in Nov 2001

SDO(s):  SAE
SAE J2366/1L   ITS Data Bus - Low Impedance Stereo Audio
This SAE Recommended Practice describes the Low Impedance Stereo Audio (LISA) bus, which may be used in conjunction with the Physical Layer of the IDB-C, as described in SAE J2366-1. The audio arbitration messages used to control access to the LISA bus are specified in SAE J2366-7. The IDB-C is a non-proprietary virtual token passing bus, designed to allow disparate consumer, vehicle, and commercial electronic components to communicate and share information.
view factsheet
For more information on how to obtain standards:
http://store.sae.org Phone: 877-606-7323


Current Published Version: Version 1, Published in Nov 2001

SDO(s):  SAE
SAE J2366/2   ITS Data Bus - Link Layer
Requirements for the link layer (layer 7 of the OSI model) for the ITS data bus.
view factsheet
For more information on how to obtain standards:
http://store.sae.org Phone: 877-606-7323


Current Published Version: Version 1, Published in Nov 2001

SDO(s):  SAE
SAE J2366/4   ITS Data Bus - Thin Transport Layer
Requirements for the thin transport layer (Layer 4 of the OSI model) for the ITS data bus.
view factsheet
For more information on how to obtain standards:
http://store.sae.org Phone: 877-606-7323


Current Published Version: Version 1, Published in Mar 2002

SDO(s):  SAE
SAE J2366/7   ITS Data Bus - Application Message Layer
Requirements for the application layer (layer 7 of the OSI model) for the ITS data bus.
view factsheet
For more information on how to obtain standards:
http://store.sae.org Phone: 877-606-7323


Current Published Version: Version 1, Published in Apr 2002

SDO(s):  SAE