Stay Connected
Search for ITS Standards
|
NTCIP 1102
Octet Encoding Rules (OER) Base Protocol A set of encoding/decoding rules to prepare data for transmission or to decode data before sending it to the application. Developed as a derivative of the Basic Encoding Rules (BER), as defined in ISO 8825-1. Within the NTCIP suites of protocols, OER is to be used in conjunction with NTCIP-STMF and NTCIP-DATEX ASN. (Formerly TS 3.BP-OER-1999) 
Information about this standard and other NTICP standards is available on the NTCIP document numbers and status page. |
Current Published Version:
Version 1, Published in Dec 2006 SDO(s): AASHTO/ITE/NEMA National ITS Architecture |
|
NTCIP 1103
Transportation Management Protocols (TMP) Specifies a set of rules and procedures for exchanging information with a minimum of overhead to provide an interoperability standard for transportation-related devices that operate over bandwidth-limited communications links.
Information about this standard and other NTICP standards is available on the NTCIP document numbers and status page. |
Current Published Version:
Version 3, Published in Dec 2016 Previous Development Activity: Version 2: Published (Oct 2010); Version 1: Published (Jan 2009) SDO(s): AASHTO/ITE/NEMA National ITS Architecture |
|
NTCIP 1104
Center-to-Center Naming Convention Specification Defines the standard mechanism to name entities within CORBA systems. CORBA is a distributed processor system, where information needed by one processor could be actually stored on some other computer, or several computers. To enable finding the required information, a common naming convention is required and used.
Information about this standard and other NTICP standards is available on the NTCIP document numbers and status page. |
Current Published Version:
Version 1, Published in May 2008 SDO(s): AASHTO/ITE/NEMA National ITS Architecture |
|
NTCIP 1105 CORBA Security Service Specification |
Suspended
|
|
NTCIP 1106 CORBA Near-Real Time Data Service Specification |
Suspended
|
|
NTCIP 1201
Global Object Definitions This document defines those pieces of data that are likely to be used in multiple device types such as actuated signal controllers and dynamic message signs. Examples of this data include time, report generation, scheduling concepts, etc. (Formerly TS 3.4)
Information about this standard and other NTICP standards is available on the NTCIP document numbers and status page. |
Current Published Version:
Version 3, Published in Mar 2011 Previous Development Activity: Version 2: Published (Oct 2005); Version 1: Published (Oct 1996); Amendment 1 to Version 1: Published (Dec 2001) SDO(s): AASHTO/ITE/NEMA National ITS Architecture |
|
NTCIP 1202
Object Definitions for Actuated Traffic Signal Controller (ASC) Units Specifications for objects that are specific to actuated signal controllers and definitions of standardized object groups that can be used for conformance statements. (Formerly TS 3.5)
Information about this standard and other NTICP standards is available on the NTCIP document numbers and status page. |
Current Published Version:
Version 3a, Published in May 2019 Previous Development Activity: Version 2: Published (Nov 2005); Version 1: Published (Jan 1996) SDO(s): AASHTO/ITE/NEMA National ITS Architecture |
|
NTCIP 1203
Object Definitions for Dynamic Message Signs (DMS) Defines data that is specific to dynamic message signs including all types of signs that can change state, such as blank-out signs, changeable signs, and variable signs. (Formerly TS 3.6)
Information about this standard and other NTICP standards is available on the NTCIP document numbers and status page. |
Current Published Version:
Version 3, Published in Sep 2013 Previous Development Activity: Version 1: Published (Mar 1997) SDO(s): AASHTO/ITE/NEMA National ITS Architecture |
|
NTCIP 1204
Object Definitions for Environmental Sensor Stations (ESS) Definitions of objects that are specific to environmental sensor stations (ESS) and object groups which can be used for conformance statements. The communication between remote entities and ESS is accomplished by using the NTCIP application layer services to convey requests to access or modify values of ESS objects. (Formerly TS 3.7)
Information about this standard and other NTICP standards is available on the NTCIP document numbers and status page. |
Current Published Version:
Version 4, Published in Apr 2022 Previous Development Activity: Version 3 with Errata: Published (Sep 2014); Version 3: Published (Nov 2009); Version 2: Published (May 2008); Version 1: Published (Sep 1998); Amendment 1 to Version 1: Published (Nov 2001) SDO(s): AASHTO/ITE/NEMA National ITS Architecture |
|
NTCIP 1205
Object Definitions for Closed Circuit Television (CCTV) Camera Control A database for closed circuit television systems. The format of the database is identical to other NTCIP devices and uses ASN.1 representation. Targeted devices include cameras, lenses, video switches, and positioning controls for aiming and identification, such as video text overlays. The standard will support various levels of conformance. (Formerly TS 3.CCTV)
Information about this standard and other NTICP standards is available on the NTCIP document numbers and status page. |
Recent Development Status:
Amendment 1 to Version 1: Published (Sep 2014) Current Published Version: Version 1, Published in Dec 2001 SDO(s): AASHTO/ITE/NEMA National ITS Architecture |